Usb mass storage error

[Closed]
Report
Posts
2
Registration date
Wednesday February 1, 2017
Status
Member
Last seen
February 1, 2017
-
Posts
1
Registration date
Monday April 3, 2017
Status
Member
Last seen
April 4, 2017
-
my usb mass storage is not working. any of the pen drive, external hard drive not getting detected. i checked and uninstalled in device manager too, but its not working after restart. it is the same problem after restart of the pc. plz help

3 replies

Posts
19532
Registration date
Wednesday October 8, 2008
Status
Contributor
Last seen
June 15, 2019
1,923
USB Mass Storage?
Posts
2
Registration date
Wednesday February 1, 2017
Status
Member
Last seen
February 1, 2017

Yes USB Mass Storage. Typo error it was.
Posts
68
Registration date
Monday February 6, 2017
Status
Contributor
Last seen
May 19, 2017
11
Remove and reinstall all USB controllers:

To remove and reinstall all USB controllers, follow these steps:

a. Click Start, click Run, type sysdm.cpl in the Open box, and then click OK.
b. Click the Hardware tab.
c. Click the Device Manager Button.
d. Expand Universal Serial Bus controllers.
e. Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
f. Restart the computer, and then reinstall the USB controllers.
g. USB 2.0 or 3.0 controller do re-install it and check again.
h. Plug in the removable USB storage device, and then test to make sure that the issue is resolved.
Posts
1
Registration date
Monday April 3, 2017
Status
Member
Last seen
April 4, 2017

Please expain plint g. stepwise