My 4gb pen drive is not working

Closed
fase - Aug 23, 2010 at 04:47 PM
deadboywalkin Posts 2 Registration date Thursday September 23, 2010 Status Member Last seen September 23, 2010 - Sep 23, 2010 at 07:38 AM
Hello,

ihave 4gb flash when iformat that its file system converted to raw now icant open that and also icant format that please give a solution


Related:

1 response

jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Aug 23, 2010 at 05:00 PM
Hello,

Try this 1.

Format your pendrive with "HP USB Disk Storage Format Tool".

Click on the below link and download it.

https://ccm.net/downloads/tools/4639-hp-usb-disk-storage-format-tool/

Good Luck.
0
thank you for giving advice but it is not solved
0
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Aug 24, 2010 at 04:48 AM
Hello,
Try this 1.
Click on start --> Run --> type cmd and click on OK. Command prompt will be opened.
Here I assume your pendrive drive letter as G:
Enter this command
format /fs:FAT32 G:
Press enter and follow the instructions.
Note : Don't forget to replace the letter "G" with your pendrive drive letter.
Good Luck.
0
deadboywalkin Posts 2 Registration date Thursday September 23, 2010 Status Member Last seen September 23, 2010
Sep 23, 2010 at 07:38 AM
it seems that the flash's firmware got defected download this tool called chip genius and make a note of your vid and pid numbers and then click on the link offered in the software
download the tool that matches your controller chip and flash it back
0