Previous Topic Next Topic

No signals detected... Please help

Closed
TheLasseTasse Posts 1 Registration date Tuesday July 17, 2012 Status Member Last seen July 17, 2012 - Jul 17, 2012 at 02:45 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jul 17, 2012 at 11:24 PM
Hello,

I was taking dust out of my pc and i also took out my screen card and the cpu cooler to get the dust off the fans. And when i was starting the pc everything was running and after 10 seconds the pc stoped for 5 seconds and started running again and on the monitor dont Get signal.
And this really sucks because its a pc worth like 2200 dollars so pls help me :)


1 response

Answer 1 / 1
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Jul 17, 2012 at 11:24 PM
Hello,

Try this 1

Remove the RAM from the slot, cleat it and place it back properly or try another

slot. If the problem still exists then remove the Video Card from the slot and place

it back properly.

Good Luck
0

Similar discussions

LG monitor says D-sub no signal
Servant-Of-SSRR -
dinesh -

15 responses
LG monitor it keeps saying D- Sub, power saving mode
Joshua Conley -
Raif -

5 responses
Monitor: No signal 'Entering power saving mode shortly'
noor1365 -
KY_WD -

1 response
No audio output device installed?????
mscherie -
rats -

15 responses
StoreJet Transcend Hard Drive cant be found in My Computer
Mariela -
joby -

6 responses