Formatting using USB (Help)
Closed
philmie89
Posts
10
Registration date
Monday March 11, 2013
Status
Member
Last seen
April 23, 2013
-
Mar 12, 2013 at 09:13 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Apr 21, 2013 at 01:00 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Apr 21, 2013 at 01:00 PM
Related:
- Formatting using USB (Help)
- Usb show - Download - Backup and recovery
- Usb flash drive tester - Download - Backup and recovery
- Windows 7 bootable usb download - Download - Storage
- Usb debugging enabler tool - Download - Other
- Ps4 too many usb devices connected - Guide
3 responses
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Mar 12, 2013 at 11:46 AM
Mar 12, 2013 at 11:46 AM
Hello,
Try this 1
Go to BIOS --> Load default settings and check if you are able to see your
USB device under the Boot priority --> Save the settings and exist from the BIOS.
If the problem still exists then let me know your motherboard brand name
and complete model number.
Good Luck
Try this 1
Go to BIOS --> Load default settings and check if you are able to see your
USB device under the Boot priority --> Save the settings and exist from the BIOS.
If the problem still exists then let me know your motherboard brand name
and complete model number.
Good Luck
philmie89
Posts
10
Registration date
Monday March 11, 2013
Status
Member
Last seen
April 23, 2013
Mar 12, 2013 at 09:49 PM
Mar 12, 2013 at 09:49 PM
Compaq Notebook model: Pressario V5000 (EZ552UA#ABA)
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Mar 13, 2013 at 02:23 PM
Mar 13, 2013 at 02:23 PM
Hello,
Try this 1
Did you try the default settings? Does the USB Led blinks during the booting process?
Good Luck
Try this 1
Did you try the default settings? Does the USB Led blinks during the booting process?
Good Luck
philmie89
Posts
10
Registration date
Monday March 11, 2013
Status
Member
Last seen
April 23, 2013
Mar 14, 2013 at 08:01 AM
Mar 14, 2013 at 08:01 AM
ive already try the default settings... and my usb is not blinking during the booting process
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Mar 15, 2013 at 11:30 AM
Mar 15, 2013 at 11:30 AM
Hello,
Try this 1
Go to CMOS settings --> Look for the options related to USB Example: Onboard USB and make sure its not set to disabled.
Good Luck
Try this 1
Go to CMOS settings --> Look for the options related to USB Example: Onboard USB and make sure its not set to disabled.
Good Luck
philmie89
Posts
10
Registration date
Monday March 11, 2013
Status
Member
Last seen
April 23, 2013
Apr 20, 2013 at 10:52 AM
Apr 20, 2013 at 10:52 AM
where could i find the cmos settings? does all laptop can read bootable usb?
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Apr 21, 2013 at 01:00 PM
Apr 21, 2013 at 01:00 PM
Hello,
Try this 1
To enter into the CMOS\BIOS settings, switch on your laptop and then at the bottom you can find the key that need to be pressed to enter into the setup. Example F1=Setup. You need to press that particular key after switching on your laptop.
Good Luck
Try this 1
To enter into the CMOS\BIOS settings, switch on your laptop and then at the bottom you can find the key that need to be pressed to enter into the setup. Example F1=Setup. You need to press that particular key after switching on your laptop.
Good Luck
