"No Signal" on acer Monitor for i7 Acer AM3920-e4022

Closed
devjunk Posts 1 Registration date Sunday June 2, 2013 Status Member Last seen June 2, 2013 - Jun 2, 2013 at 12:03 PM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jun 2, 2013 at 01:25 PM
hi, i have i7 Acer desktop AM3920-e4022 which is connected to Acer Monitor. i am getting "No Signal" when i turn my computer on. please help me to resolve this issue.

1 reply

jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Jun 2, 2013 at 01:25 PM
Hello,

Try this 1

If you notice that your CPU fan is running but there is no display in the screen,

then remove the RAM from the slot, clean it and place it back properly or try

another slot.

If you have no idea about RAM, then click on the below hyperlinks "Images".

RAM

Removing a RAM

Check your RAM also. Even bad RAM will result in display problem.

If you are having two RAMs then remove it, place only one RAM and check the

display. If you failed to get any display then change the slot. If you still failed to

get the display then try the above procedure with the other RAM.

Good Luck
0