Pen Drive Not Detected and Reporting 0 Bytes
Closed
DennisSmith
Posts
1
Registration date
Thursday June 30, 2016
Status
Member
Last seen
June 30, 2016
-
Jun 30, 2016 at 09:42 PM
KY_WD Posts 2053 Registration date Thursday October 23, 2014 Status Member Last seen February 28, 2017 - Jul 8, 2016 at 10:37 AM
KY_WD Posts 2053 Registration date Thursday October 23, 2014 Status Member Last seen February 28, 2017 - Jul 8, 2016 at 10:37 AM
Related:
- Pen Drive Not Detected and Reporting 0 Bytes
- //192.168.l.0 - Guide
- Wd drive unlock - Guide
- Ps3 disc drive not working - Guide
- How to remove write protection from pen drive - Guide
- Flash drive/card tester - Download - Backup and recovery
1 response
KY_WD
Posts
2053
Registration date
Thursday October 23, 2014
Status
Member
Last seen
February 28, 2017
122
Jul 8, 2016 at 10:37 AM
Jul 8, 2016 at 10:37 AM
Hi there DennisSmith,
Could you tell me please, have you tested your pen drive on several PCs? Does it work there or is still unreadable? I don't know what steps have you been performing to access the USB but you could try these steps, if you haven't done it already:
1. Open command prompt
2. Type the following:
attrib -h -r -s /s /d X:\*.* Then hit "Enter" and wait about for some seconds
Be careful! Respect the spaces between words and script. Change the letter X with that has been assigned to the USB device on your PC (that you can see it in My Computer. It can be anything, depends on each computer.)
3. Finally, browse the flash drive and delete the recycle folder and if there is another one called "Autorun" you have to delete that too.
Let me know if that helped you.
Could you tell me please, have you tested your pen drive on several PCs? Does it work there or is still unreadable? I don't know what steps have you been performing to access the USB but you could try these steps, if you haven't done it already:
1. Open command prompt
2. Type the following:
attrib -h -r -s /s /d X:\*.* Then hit "Enter" and wait about for some seconds
Be careful! Respect the spaces between words and script. Change the letter X with that has been assigned to the USB device on your PC (that you can see it in My Computer. It can be anything, depends on each computer.)
3. Finally, browse the flash drive and delete the recycle folder and if there is another one called "Autorun" you have to delete that too.
Let me know if that helped you.