How to upgrade firmware if its not reachable.
Closed
Shital Mehra
-
Dec 23, 2010 at 08:21 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Dec 23, 2010 at 08:41 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Dec 23, 2010 at 08:41 AM
Related:
- How to upgrade firmware if its not reachable.
- Ps3 firmware - Guide
- How to upgrade facebook account - Guide
- Sandisk cruzer blade 16gb firmware download - Hard Drive & SSD Forum
- Kingston dt50 16gb firmware ✓ - Hardware Forum
- US SanDisk - Pen Drive, USB & SD Card Forum
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Dec 23, 2010 at 08:41 AM
Dec 23, 2010 at 08:41 AM
Hello,
Try this 1
Reset your router. You can find the reset button at the back of your
router. You can use paperclip to push the button. When your router is ON,
just hold the reset button for 30 secs and release it. It will reboot on its own.
(Note : It will clear all the settings you have configured in the router.)
After, resetting connect to your router (through wired) and then configure the
settings. You can download the manual from the manufacture website and follow
the instructions to configure your router again and upgrading the firmware.
Good Luck.
Try this 1
Reset your router. You can find the reset button at the back of your
router. You can use paperclip to push the button. When your router is ON,
just hold the reset button for 30 secs and release it. It will reboot on its own.
(Note : It will clear all the settings you have configured in the router.)
After, resetting connect to your router (through wired) and then configure the
settings. You can download the manual from the manufacture website and follow
the instructions to configure your router again and upgrading the firmware.
Good Luck.
