Removable disk not showing up
Closed
prudhvi
-
Feb 15, 2011 at 03:29 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Feb 15, 2011 at 10:56 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Feb 15, 2011 at 10:56 AM
Related:
- Removable disk not showing up
- Blackmagic disk speed test windows - Download - Diagnosis and monitoring
- Floppy disk fail 40 - Guide
- Working of hard disk with diagram - Guide
- Lenovo password reset without disk - Guide
- Ps3 not reading disk - Guide
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Feb 15, 2011 at 10:56 AM
Feb 15, 2011 at 10:56 AM
Hello,
Try this 1.
1) First unplug your Pen Drive and try different port.
2) Click on Start --> Run --> Type devmgmt.msc and press "Enter".
"Device Manager" will be opened. If there is any yellow mark then right-click on it
and select the option "Uninstall". After that click on "Action" --> Scan for hardware
changes.
[Note: If "Scan for hardware" changes is missing then click on the white area in
the device manager and then follow the instruction.]
If the problem still exits then right-click on the yellow mark and select the option
"Update" or reinstall the drivers.
3) Plug your pendrive --> Click on Start --> Run --> Type devmgmt.msc and
press "Enter" --> Expand "Universal Serial Bus controllers" --> Right-click on
"USB Mass Storage Device" ---> Click on "Uninstall"--> Remove your pendrive
and restart your PC.
Good Luck.
Try this 1.
1) First unplug your Pen Drive and try different port.
2) Click on Start --> Run --> Type devmgmt.msc and press "Enter".
"Device Manager" will be opened. If there is any yellow mark then right-click on it
and select the option "Uninstall". After that click on "Action" --> Scan for hardware
changes.
[Note: If "Scan for hardware" changes is missing then click on the white area in
the device manager and then follow the instruction.]
If the problem still exits then right-click on the yellow mark and select the option
"Update" or reinstall the drivers.
3) Plug your pendrive --> Click on Start --> Run --> Type devmgmt.msc and
press "Enter" --> Expand "Universal Serial Bus controllers" --> Right-click on
"USB Mass Storage Device" ---> Click on "Uninstall"--> Remove your pendrive
and restart your PC.
Good Luck.
