Connect to wireless but not server
Closed
Sophy
-
Jun 9, 2011 at 02:05 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jun 9, 2011 at 11:09 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Jun 9, 2011 at 11:09 AM
Related:
- Connect to wireless but not server
- Wireless keyboard won't type - Guide
- Turn off usb connect sound - Guide
- Gmail incoming mail server - Guide
- Free fire advance server - Guide
- Wireless network watcher - Download - Other
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Jun 9, 2011 at 11:09 AM
Jun 9, 2011 at 11:09 AM
Hello,
Try this 1
1)Right click on "Internet Explorer" icon --->click on "Properties" ---> Click on
"Connections" tab--> Click on LAN settings button. In that window uncheck all
the options, if you notice any option selected--->Click on OK---> Click on OK.
If the problem still exists, go to step 2.
2) Make sure that IP address and DNS server was set to obtain the address
automatically .
Click on Start --> Run --> Type ncpa.cpl and press "Enter".
Right click on your Wireless Network icon ---> Select "Properties" ---> Scroll down
and double click on "Internet Protocol[TCP/IP]" . Make sure that
"Obtain IP address automatically" and "Obtain DNS server address automatically"
options are selected.
3) Click on Start --> Run --> Type --> devmgmt.msc and press "Enter". Type the
below command.
ipconfig /all ---> Press Enter.
Make sure that IP Address, Subnet Mask, Default Gateway and DNS Servers
are having addresses.
4) Check your firewall. Try temporary disabling either the Firewall or Antivirus.
Good Luck
Try this 1
1)Right click on "Internet Explorer" icon --->click on "Properties" ---> Click on
"Connections" tab--> Click on LAN settings button. In that window uncheck all
the options, if you notice any option selected--->Click on OK---> Click on OK.
If the problem still exists, go to step 2.
2) Make sure that IP address and DNS server was set to obtain the address
automatically .
Click on Start --> Run --> Type ncpa.cpl and press "Enter".
Right click on your Wireless Network icon ---> Select "Properties" ---> Scroll down
and double click on "Internet Protocol[TCP/IP]" . Make sure that
"Obtain IP address automatically" and "Obtain DNS server address automatically"
options are selected.
3) Click on Start --> Run --> Type --> devmgmt.msc and press "Enter". Type the
below command.
ipconfig /all ---> Press Enter.
Make sure that IP Address, Subnet Mask, Default Gateway and DNS Servers
are having addresses.
4) Check your firewall. Try temporary disabling either the Firewall or Antivirus.
Good Luck
