System not start
Closed
avinash anandrao pawar
Zohaib R
- Posts
- 1
- Registration date
- Thursday February 14, 2013
- Status
- Member
- Last seen
- February 14, 2013
Zohaib R
- Posts
- 2368
- Registration date
- Sunday September 23, 2012
- Status
- Member
- Last seen
- December 13, 2018
Related:
- System not start
- Teamviewer start with windows - Guide
- How to start group session spotify on pc - Guide
- The application was unable to start correctly (0xc0000005) google chrome ✓ - Forum - Google Chrome
- Windows 10 installation starts all over again after reboot - Forum - Windows 10
- We can’t sign you in right now. please try again in a while. start over - Forum - Messaging
1 reply
Zohaib R
Feb 14, 2013 at 10:21 AM
- Posts
- 2368
- Registration date
- Sunday September 23, 2012
- Status
- Member
- Last seen
- December 13, 2018
Feb 14, 2013 at 10:21 AM
Hi avinash anandrao pawar,
The symptoms you have mentioned indicate there is some problem with the Power Sub System or the computer is not completing the POST (Power On Self Test) process. Please try these simple steps and check if there is any change:
1. Disconnect the power source from the computer.
2. Remove any External peripherals from the machine.
3. Press and hold the power button for 10-15 seconds and then release. This will release any Flea Power stored in the machine.
4. Re-connect the power source try to power on the computer.
5. Press the Power button on the Tower and Monitor. Check the Power LED status on Monitor and the tower.
6. If Desktop Power button is Steady / Blinking, But No video on the screen - Press CAPS lock key and check for response.
7. Check for any LED or Beep error code.
If any of the above symptoms are observed, please include in your reply.
Please do write back to us.
The symptoms you have mentioned indicate there is some problem with the Power Sub System or the computer is not completing the POST (Power On Self Test) process. Please try these simple steps and check if there is any change:
1. Disconnect the power source from the computer.
2. Remove any External peripherals from the machine.
3. Press and hold the power button for 10-15 seconds and then release. This will release any Flea Power stored in the machine.
4. Re-connect the power source try to power on the computer.
5. Press the Power button on the Tower and Monitor. Check the Power LED status on Monitor and the tower.
6. If Desktop Power button is Steady / Blinking, But No video on the screen - Press CAPS lock key and check for response.
7. Check for any LED or Beep error code.
If any of the above symptoms are observed, please include in your reply.
Please do write back to us.