Problem in configuring netgear jnr1010 with reliance broadband

Solved/Closed
lakshaymittal
Posts
9
Registration date
Tuesday May 13, 2014
Status
Member
Last seen
May 30, 2014
- May 30, 2014 at 08:40 AM
 Blocked Profile - May 30, 2014 at 03:03 PM
i 've getting problem in getting configure netgear router with reliance broadband connection ... i have zte modem attached to router ... the router is working with th pc port but wireless is not working

10 replies

Blocked Profile
May 30, 2014 at 11:50 AM
Have you verified the wireless client is turned on? What displays on the screen when you open your favorite browser? Can you ping the wireless gateway from the client?

So let us know if you are pulling an IP Address and can you ping the gateway?

Have FUN!

"If you can't soar with the eagles, then don't fly with the flock!" - Oliver Sykes; Bring Me The Horizon
0
lakshaymittal
Posts
9
Registration date
Tuesday May 13, 2014
Status
Member
Last seen
May 30, 2014

May 30, 2014 at 12:43 PM
when i attached router with cable the i acess the web page but it can't connect through wireless
0
Blocked Profile
May 30, 2014 at 01:00 PM
I understood that.

Is the client even turned on? Do you know how to turn it on?

I am willing to say that you have not even verifed if there is a 802.11 device.

Did it ever work?

"If you can't soar with the eagles, then don't fly with the flock!" - Oliver Sykes; Bring Me The Horizon
0
lakshaymittal
Posts
9
Registration date
Tuesday May 13, 2014
Status
Member
Last seen
May 30, 2014

May 30, 2014 at 01:02 PM
no i don't know how to turn it on
0

Didn't find the answer you are looking for?

Ask a question
Blocked Profile
May 30, 2014 at 01:03 PM
What is the client machine make and model please? What OS?
0
lakshaymittal
Posts
9
Registration date
Tuesday May 13, 2014
Status
Member
Last seen
May 30, 2014

May 30, 2014 at 01:14 PM
windows 8.1
0
Blocked Profile
May 30, 2014 at 01:30 PM
OK, so what machine make? HP, DELL, SONY, TOSHIBA? I need the make and model of the laptop so I can find the on/off switch for you. There is ging to be either a physical switch to flip, or you are going to have to use a keyboard combination to turn it on with software. Either way I need th emake and model of the machine. It is a laptop right? Or is it a desktop machine? Or is it an all in one unit?


Look for a wireless card, in control panel, hardware, device manager. Look for a 802.11 wireless device.



Let me know what the make and model is.
0
lakshaymittal
Posts
9
Registration date
Tuesday May 13, 2014
Status
Member
Last seen
May 30, 2014

May 30, 2014 at 01:36 PM
LENOVO Z570
0
lakshaymittal
Posts
9
Registration date
Tuesday May 13, 2014
Status
Member
Last seen
May 30, 2014

May 30, 2014 at 01:57 PM
this is what i found ... i have another router which i sworking perfectly
0
Blocked Profile
May 30, 2014 at 03:03 PM
Ok, the N portion, your other router may be G type, and cannot broadcast on dual band like N can.

N is the latest and greatest, and it looks like your router can (probably) only connect on N band, which is dual band mode, and the other router is problem generation G, which is a single band frequency for send and receive.

See if your router will broadcast on G and N. That is it. Take a look at my adaptor in my picture, you will see it is B/G/N capable. Your client is only N. Your router is probably B/G/N, and N is turned off.

"If you can't soar with the eagles, then don't fly with the flock!" - Oliver Sykes; Bring Me The Horizon
0