Monitor shows no signal [Closed]

Report
Posts
1
Registration date
Thursday December 10, 2015
Status
Member
Last seen
December 31, 2015
-
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
-
Hello,
I have a problem with my desktop pc.
As i turn the pc on, the lights are blinking,fans running, but monitor shows no signal. I tried to change to different monitor, unplug and plug back the vga, hold down power button.
But it still showing no signal on the monitor.
Please tell me what to do.
Thanks in advance

2 replies

Posts
19540
Registration date
Wednesday October 8, 2008
Status
Contributor
Last seen
June 15, 2019
1,685
The "no signal" message can be caused by:
1. failed/disconnected cable
2. failed video card
3. failed motherboard

I suggest you have a local PC repair shop take a look at it.

Good Luck
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020

Hello,

xpcman, please let me add few more lines

Try this 1

If you notice that your CPU fan is running but there is no display in

the screen, then check your RAM also.

Remove the RAM from the slot, clean it and place it back properly or try

another slot.

If you are having two RAMs then remove it, place only one RAM and

check if you are able to get the display. If the problem still exists then

change the slot. If the problem still exists then try the above procedure

with the other RAM.

If you have no idea about RAM, then click on the below hyperlinks

RAM

Removing a RAM

Good Luck

Subscribe To Our Newsletter!

The Best of CCM in Your Inbox

Subscribe To Our Newsletter!