HDD Regeneration program to identify bad sector's and isolate
Closed
Dummy23
R2D2_WD
- Posts
- 2
- Registration date
- Monday May 9, 2016
- Status
- Member
- Last seen
- May 9, 2016
R2D2_WD
- Posts
- 3606
- Registration date
- Monday September 1, 2014
- Status
- Member
- Last seen
- February 20, 2017
Related:
- HDD Regeneration program to identify bad sector's and isolate
- Hdd regenerator - Download
- Identify the logical error in the program to print the following pattern 11 1111 111111 ✓ - Forum - Programming
- Xvideoservicethief 2018 linux hdd usb port not working problem solution - Forum - Hardware
- USB HDD's are not recognised on new computer - Forum - Hard Drive/SSD
- Download xvideoservicethief 2019 linux hdd - Download
1 reply
R2D2_WD
May 10, 2016 at 05:56 AM
- Posts
- 3606
- Registration date
- Monday September 1, 2014
- Status
- Member
- Last seen
- February 20, 2017
May 10, 2016 at 05:56 AM
Hello Dummy23,
I would recommend you to use the hard drive manufacturer’s diagnostic tool and confirm the condition of the drive. Do you suspect that the hard drive is not running as expected? If you have backups, format the hard drive and use a tool to write zeros. Check again with the diagnostics tool and investigate if there are any differences. Depending on the drive’s condition, you may be able to use it with some sector problems, but you should keep making backups and monitoring the HDD’s condition.
Hope this helps
I would recommend you to use the hard drive manufacturer’s diagnostic tool and confirm the condition of the drive. Do you suspect that the hard drive is not running as expected? If you have backups, format the hard drive and use a tool to write zeros. Check again with the diagnostics tool and investigate if there are any differences. Depending on the drive’s condition, you may be able to use it with some sector problems, but you should keep making backups and monitoring the HDD’s condition.
Hope this helps