Window is not start only blank page

Closed
Arty - Sep 3, 2010 at 02:55 PM
 Arty - Sep 4, 2010 at 06:11 PM
Hello,
when I open my computer
the window is not start
and only blank page appear
what I should do ???
If someone know about that solution pls help me
thx alot



4 replies

Blocked Profile
Sep 4, 2010 at 03:35 AM
Dear Arty,

Please provide clearer information about the specific applications that you are trying to open so that we get to understand the matter completely and hence help you about it.

Thanks in advance.
1
Hi thx for ur responds
when I open my laptop only blank screen is appear
window is not starting up
can I know y??
And what can I do
I don't want to format my HHD
thx
waiting for ur reply
:)
0
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Sep 4, 2010 at 04:09 PM
Hello Arty,
1)If you notice only blank screen when you switched ON you laptop, then try removing the RAM from the slot, clean it and place it back properly or try another slot. Check your RAM also. Even bad RAM will result in display problem.

2)If you can see the logo display only, then try fixing the mbr and the boot file Or Let me know your OS, so that I can give you the steps. That's because steps will differ according to your OS.
Good Luck.
0
Thank u so much for ur help
but I don't have window cd rite now
I will take from my fri and
I will try the way u tell me
thanks again :)
1
Yes, i use XP in my laptop
firstly campaq logo appears and after that
only blank screen appear
so what should I do??
0
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Sep 4, 2010 at 05:11 PM
Hello,

Try this 1.

1) Place the "Windows xp" CD in the drive and make sure your first boot device

is set to CD\DVD drive to boot from it.

2) When prompted to "Press any key to boot from the CD", press any key.

3) When welcome screen appears, press "R" key to go to recovery console.

4) When it asks "Which Windows installation would you like to log onto", press 1

key and then press "Enter".

5) Enter your administrator password.

6) Now C:\Windows> prompt appears. Now enter this command.

fixmbr -----> Press Enter.

When it asks you "Are you sure you want to write a new MBR?" press y and then

press "Enter"

7) Now enter this command.

bootcfg /rebuid and press "Enter".

Windows installation scan will be performed.

When it asks you "Add installation to boot list" press y and then press "Enter"

Then enter the following.

For "Enter Load Identifier"prompt ---> type Windows XP Professional and press

Enter.

For "Enter OS Load Options" prompt ---> type /fastdetect and press Enter.

Note : Don't forget "/" before fastdetect.

Then type exist to reboot your computer.

Note : Remove the Windows xp CD from the drive after the reboot or this time

don't press any key.

Good Luck.
0