Previous Topic Next Topic

Monitor signal on boot

Solved/Closed
gilyo Posts 1 Registration date Thursday September 9, 2010 Status Member Last seen September 9, 2010 - Sep 9, 2010 at 02:23 PM
 gilyo - Oct 4, 2010 at 06:20 AM
Hello,

I have a problem with an LCD Monitor (ACER).

The monitor has to be powered only after the PC has finished booting.

If the PC is powered first , a "no signal" message comes up and the screen goes black for ever.

The video card is an ATI Radeon 7000.


Thank you for your help.
Related:

2 responses

Answer 1 / 2
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Sep 9, 2010 at 02:32 PM
Hello,

Try this 1.

1) If you are using the Video Card then go to BIOS and disable the onboard VGA.

2) Update the Video Card drivers.

Good Luck.
0
gilyo
Sep 15, 2010 at 06:33 PM
Hello,

There is no onboard video adapter.

I updated rhe drivers witn no luck.

The problem remains.

If you have another solution it would be greatly appreciated.

Thank you.

GL
0
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Sep 16, 2010 at 01:15 AM
Hello,
Try this 1.
1) Go to BIOS and load default settings --> save and exit the BIOS.
2) If the problem still exists, try updating your BIOS.
Good Luck.
0
Answer 2 / 2
gilyo
Oct 4, 2010 at 06:20 AM
Hi,

Finally, the problem has to do with the video card.

I found a way to eliminate the problem, by not connecting the DVI cable.

Thank you very much for your help.

GL
0

Similar discussions

LG monitor says D-sub no signal
Servant-Of-SSRR -
dinesh -

15 responses
monitor keeps going in power save mode
diane31diane -
boog -

9 responses
LG monitor it keeps saying D- Sub, power saving mode
Joshua Conley -
Raif -

5 responses
Unsupported signal. Please check device output
S.Agnew -
Yaya68 -

14 responses
Computer starts but monitor says "no signal"
smussery -
OMARJAWO -

2 responses