Internet
Closed
Grant
-
Feb 23, 2009 at 01:08 PM
xpcman Posts 19528 Registration date Wednesday October 8, 2008 Status Contributor Last seen June 15, 2019 - Feb 23, 2009 at 04:52 PM
xpcman Posts 19528 Registration date Wednesday October 8, 2008 Status Contributor Last seen June 15, 2019 - Feb 23, 2009 at 04:52 PM
Related:
- Internet
- Fenix internet l - Guide
- Internet explorer 11 for windows 10 64-bit - Download - Browsers
- Internet cafe simulator 2 download pc - Download - Simulation
- Share internet from pc to iphone - Guide
- Pc has internet but cannot browse - Guide
1 response
xpcman
Posts
19528
Registration date
Wednesday October 8, 2008
Status
Contributor
Last seen
June 15, 2019
1,824
Feb 23, 2009 at 04:52 PM
Feb 23, 2009 at 04:52 PM
you may have a DHCP problem - DHCP gets the IP address from the router - to test this assumption you can enter the following address for Google http://74.125.95.99/ in your browser. If the browser does in fact connect to Google you can use the following steps to help resolve the problem. I have had mixed results with these tools and can't guarantee anything:
the first thing to check is NetBIOS over TCP/IP
>> Open up network connections (In Control Panel)
>> Right click on your network (Your wireless connection)
>> Click Properties
>> In the "General" tab click "Internet protocol" (TCP/IP)
>> Click "Properies"
>> Click "Advanced"
>> Click the "WINS" tab
>> Click the Enable NetBIOS Over TCP/IP button (This is NOT the default option)
The next item to check is the DHCP service itself:
click on start, run, enter 'services.msc'
look for DHCP client....
if it says acquiring network address that means that the dhcp client is DISABLED OR STOPTED... highlight the
DHCP client and on the left side you will see "START" the service, click on it and then it will say "STOP,
RESTART" then double click on the service and on the startup type select automatic, apply
Symptom
DHCP Client Service may not start automatically. When you attempt to start the Service manually, the
following error may be displayed:
Error: Could not start the DHCP Client Service on local computer
Error 1068: The dependency service or group failed to start.
Resolution
The DHCP Client Service in Windows XP, depends on these three components:
* AFD
* NetBios over Tcpip
* TCP/IP Protocol Driver
If one of the above drivers fail to start, then the DHCP Client Service may not start.
Step I - Make sure that the three driver files are present
Open Windows Explorer and navigate to /Windir/System32Drivers folder. Make sure that the following files
are present in the folder:
* afd.sys
* tcpip.sys
* netbt.sys
If one or more of the above driver files are missing, extract them from the Windows XP CD-ROM or from the
ServicePackFilesi386 folder, whichever is the latest version.
Step II - Verify the number of Dependencies
From other sources in the Web, I've found that some versions of Norton Antivirus (NAV) adds an entry to the
DHCP Service Dependencies, and removing NAV does not remove the appropriate value from the DHCP
Dependencies.
To quickly determine the Dependency services for DHCP Client Service, type the following command in Start,
Run dialog:
CMD /K SC QC DHCP
Verify the output. It should be exactly as below:
[SC] GetServiceConfig SUCCESS
SERVICE_NAME: dhcp
TYPE : 20 WIN32_SHARE_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 1 NORMAL
BINARY_PATH_NAME : C:WINDOWSsystem32svchost.exe -k netsvcs
LOAD_ORDER_GROUP : TDI
TAG : 0
DISPLAY_NAME : DHCP Client
DEPENDENCIES : Tcpip
: Afd
: NetBT
SERVICE_START_NAME : LocalSystem
If additional entries are listed under DEPENDENCIES...
If any other additional drivers or Services are mentioned in the DEPENDENCIES section, you need to remove
them via the registry. Follow these steps:
* Click Start, Run and type Regedit.exe
* Navigate to the following branch:
* Backup the branch to a REG file
HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services Dhcp
* Double-click DependOnService MULTI_SZ value and set it's data as follows:
Tcpip
Afd
NetBT
* Close Regedit.exe
Step III - Verify that the Dependency Service / components are running
Next step is to verify that the three dependency components are running. As the three components are
actually the Kernel Drivers (Driver Service), you need to manage then via the Device Manager. Follow these
steps:
* Click Start, Run and type DEVMGMT.MSC
* In the View menu, click Show hidden devices
* Double-click Non-Plug and Play drivers section
* Double-click the entry - AFD Networking Support Environment, and click the Driver tab
* Set the Startup type to System.
* Start the service. Note down the error message if any.
* Similarly start the two other drivers namely:
* TCP/IP Protocol Driver
* NetBios over Tcpip
* Close Device Manager and restart Windows.
the first thing to check is NetBIOS over TCP/IP
>> Open up network connections (In Control Panel)
>> Right click on your network (Your wireless connection)
>> Click Properties
>> In the "General" tab click "Internet protocol" (TCP/IP)
>> Click "Properies"
>> Click "Advanced"
>> Click the "WINS" tab
>> Click the Enable NetBIOS Over TCP/IP button (This is NOT the default option)
The next item to check is the DHCP service itself:
click on start, run, enter 'services.msc'
look for DHCP client....
if it says acquiring network address that means that the dhcp client is DISABLED OR STOPTED... highlight the
DHCP client and on the left side you will see "START" the service, click on it and then it will say "STOP,
RESTART" then double click on the service and on the startup type select automatic, apply
Symptom
DHCP Client Service may not start automatically. When you attempt to start the Service manually, the
following error may be displayed:
Error: Could not start the DHCP Client Service on local computer
Error 1068: The dependency service or group failed to start.
Resolution
The DHCP Client Service in Windows XP, depends on these three components:
* AFD
* NetBios over Tcpip
* TCP/IP Protocol Driver
If one of the above drivers fail to start, then the DHCP Client Service may not start.
Step I - Make sure that the three driver files are present
Open Windows Explorer and navigate to /Windir/System32Drivers folder. Make sure that the following files
are present in the folder:
* afd.sys
* tcpip.sys
* netbt.sys
If one or more of the above driver files are missing, extract them from the Windows XP CD-ROM or from the
ServicePackFilesi386 folder, whichever is the latest version.
Step II - Verify the number of Dependencies
From other sources in the Web, I've found that some versions of Norton Antivirus (NAV) adds an entry to the
DHCP Service Dependencies, and removing NAV does not remove the appropriate value from the DHCP
Dependencies.
To quickly determine the Dependency services for DHCP Client Service, type the following command in Start,
Run dialog:
CMD /K SC QC DHCP
Verify the output. It should be exactly as below:
[SC] GetServiceConfig SUCCESS
SERVICE_NAME: dhcp
TYPE : 20 WIN32_SHARE_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 1 NORMAL
BINARY_PATH_NAME : C:WINDOWSsystem32svchost.exe -k netsvcs
LOAD_ORDER_GROUP : TDI
TAG : 0
DISPLAY_NAME : DHCP Client
DEPENDENCIES : Tcpip
: Afd
: NetBT
SERVICE_START_NAME : LocalSystem
If additional entries are listed under DEPENDENCIES...
If any other additional drivers or Services are mentioned in the DEPENDENCIES section, you need to remove
them via the registry. Follow these steps:
* Click Start, Run and type Regedit.exe
* Navigate to the following branch:
* Backup the branch to a REG file
HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services Dhcp
* Double-click DependOnService MULTI_SZ value and set it's data as follows:
Tcpip
Afd
NetBT
* Close Regedit.exe
Step III - Verify that the Dependency Service / components are running
Next step is to verify that the three dependency components are running. As the three components are
actually the Kernel Drivers (Driver Service), you need to manage then via the Device Manager. Follow these
steps:
* Click Start, Run and type DEVMGMT.MSC
* In the View menu, click Show hidden devices
* Double-click Non-Plug and Play drivers section
* Double-click the entry - AFD Networking Support Environment, and click the Driver tab
* Set the Startup type to System.
* Start the service. Note down the error message if any.
* Similarly start the two other drivers namely:
* TCP/IP Protocol Driver
* NetBios over Tcpip
* Close Device Manager and restart Windows.
