External drive shows this folder is empty
Closed
leesass
Posts
1
Registration date
Tuesday November 12, 2013
Status
Member
Last seen
November 12, 2013
-
Nov 12, 2013 at 10:28 PM
Ambucias Posts 47356 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 - Nov 13, 2013 at 05:23 AM
Ambucias Posts 47356 Registration date Monday February 1, 2010 Status Moderator Last seen February 15, 2023 - Nov 13, 2013 at 05:23 AM
Related:
- External drive shows this folder is empty
- Anvi folder locker reset key - Guide
- Wd drive unlock - Guide
- Flash drive/card tester - Download - Backup and recovery
- Hard drive regenerator - Download - Backup and recovery
- Ps3 disc drive not working - Guide
1 response
Ambucias
Posts
47356
Registration date
Monday February 1, 2010
Status
Moderator
Last seen
February 15, 2023
11,169
Nov 13, 2013 at 05:23 AM
Nov 13, 2013 at 05:23 AM
Hello,
If you did not format your drive, then check whether the files are not in
hidden mode.
Click on "Start" -->Run-->type cmd and click on OK.
Here I assume your drive letter as G:
Enter this command.
attrib -h -r -s /s /d g:\*.*
Now press enter.
Note : Don't forget to replace the letter g with your drive letter.
Now check for your files in that drive.
After that, download the Malwarebytes' Anti-Malware from the below link
https://ccm.net/downloads/security-and-maintenance/4621-malwarebytes-anti-malware/
Update it --> Perform "Full Scan"
Note : Default selected option is "Quick Scan".
Good Luck.
If you did not format your drive, then check whether the files are not in
hidden mode.
Click on "Start" -->Run-->type cmd and click on OK.
Here I assume your drive letter as G:
Enter this command.
attrib -h -r -s /s /d g:\*.*
Now press enter.
Note : Don't forget to replace the letter g with your drive letter.
Now check for your files in that drive.
After that, download the Malwarebytes' Anti-Malware from the below link
https://ccm.net/downloads/security-and-maintenance/4621-malwarebytes-anti-malware/
Update it --> Perform "Full Scan"
Note : Default selected option is "Quick Scan".
Good Luck.
