Previous Topic Next Topic

Monitor says " No signal detected"

Closed
balaganz Posts 3 Registration date Monday February 23, 2015 Status Member Last seen February 23, 2015 - Feb 23, 2015 at 07:26 AM
balaganz Posts 3 Registration date Monday February 23, 2015 Status Member Last seen February 23, 2015 - Feb 23, 2015 at 07:43 AM
Heelo guys so I've been using my PC today doing some browsing and stuff and then my and driver reminded that it needs to update and since I was using then internet I chose later. Then the screen went into a wierd shizzle blinking and scattered and then blank screen. When I restart my PC the monitor gives the above info. I opened up the tower and everything is running CPU ,GPU,HDD and all.
ANY HELP WOULD BE APPRECIATED.THANKS Y'ALL.

1 response

Answer 1 / 1
Computertech Posts 3569 Registration date Friday February 6, 2015 Status Moderator Last seen July 18, 2016 893
Feb 23, 2015 at 07:34 AM
Hello,
can you check your VGA and power cables of monitor try to fix it properly... and then switch of the cpu and then try to on...
post the result..
also,
Please check with this...
https://ccm.net/faq/350-no-signal-error-message-displayed-on-the-monitor

balaganz Posts 3 Registration date Monday February 23, 2015 Status Member Last seen February 23, 2015
Feb 23, 2015 at 07:36 AM
Hi. I've tried to connect it to my TV which has a HDMI connevtion . still the same. Also o tried connecting it to on board GPU. Still the same thing.
Computertech Posts 3569 Registration date Friday February 6, 2015 Status Moderator Last seen July 18, 2016 893
Feb 23, 2015 at 07:39 AM
So monitor is good, fan running ,cables good, HDD good, check with RAM ,change the slots... if it not works then it may be Graphic card problem.. If it is external Graphic card try to change it otherwise you have to change the motherboard itself...
balaganz Posts 3 Registration date Monday February 23, 2015 Status Member Last seen February 23, 2015 > Computertech Posts 3569 Registration date Friday February 6, 2015 Status Moderator Last seen July 18, 2016
Feb 23, 2015 at 07:43 AM
I changed the RAM slots. Ive tried removing the CMOS battery. As I mentioned above I switched with the onboard GPU too. Still no luck. Thanks for your time.

Similar discussions

LG monitor says D-sub no signal
Servant-Of-SSRR -
dinesh -

15 responses
Blue screen leading to "no signal" from monitor
i.p.mattingly -
ac3mark -

3 responses
LG monitor it keeps saying D- Sub, power saving mode
Joshua Conley -
Raif -

5 responses
No signal going into power saving mode
Barb -
HelpiOS -

1 response
Monitor says No Input signal Need help!
Nutiler -
pcsces -

2 responses