No signal to dvi monitor,
Closed
smb821
Posts
2
Registration date
Tuesday March 13, 2018
Status
Member
Last seen
March 13, 2018
-
Updated on Mar 13, 2018 at 05:41 PM
smb821 Posts 2 Registration date Tuesday March 13, 2018 Status Member Last seen March 13, 2018 - Mar 13, 2018 at 06:48 PM
smb821 Posts 2 Registration date Tuesday March 13, 2018 Status Member Last seen March 13, 2018 - Mar 13, 2018 at 06:48 PM
Related:
- No signal to dvi monitor,
- Dvi file - Guide
- No signal on monitor but cpu running - Guide
- D sub no signal - Monitor Forum
- Sceptre monitor no signal entering power save mode - Windows 7 Forum
- Entering the power saving mode shortly - Windows Forum
2 responses
xpcman
Posts
19530
Registration date
Wednesday October 8, 2008
Status
Contributor
Last seen
June 15, 2019
1,825
Mar 13, 2018 at 06:35 PM
Mar 13, 2018 at 06:35 PM
Is the DVI plug on the motherboard or is it on a video card?
All those components run on 5 volts. The CPU runs on 12 volts.
I suggest you unplug the power cord. then detach the power cable to the motherboard and then reattach. You might just have a bad connection or you might have a failure of the power supply.
Good Luck
All those components run on 5 volts. The CPU runs on 12 volts.
I suggest you unplug the power cord. then detach the power cable to the motherboard and then reattach. You might just have a bad connection or you might have a failure of the power supply.
Good Luck
smb821
Posts
2
Registration date
Tuesday March 13, 2018
Status
Member
Last seen
March 13, 2018
Mar 13, 2018 at 06:48 PM
Mar 13, 2018 at 06:48 PM
DIV aattached to mb. I cleaned all dust. unplugged & replugged everything. no lights to num on mb, power only turns on not off ha've to use switch on back so I can't do 30sec drain
