Previous Topic Next Topic

My monitor will not power on after turning on

Solved/Closed
Razzadas Posts 2 Registration date Saturday July 28, 2012 Status Member Last seen July 28, 2012 - Jul 28, 2012 at 01:06 AM
Razzadas Posts 2 Registration date Saturday July 28, 2012 Status Member Last seen July 28, 2012 - Jul 28, 2012 at 06:31 PM
Hi all

Have read through all the help regarding monitor not powering up, my problem relates to most of them, but I have a deeper problem in that a red light lights up on my PC tower just below start button and next to a smaller push button.

Showing on the monitor is - NO INPUT SIGNAL - then - MONITOR GOING TO SLEEP - then the screen goes black.

Also, 3 beeps are heard then they stop for about 30 seconds then 3 beeps again, this will continue until I power off PC.

Reading your help regarding beeps I am afraid that my mother board may be shot, can anyone confirm this.

Thankyou all

Razzadas
Related:

2 responses

Answer 1 / 2
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020
Jul 28, 2012 at 02:31 AM
Hello,

Try this 1

If you notice that your CPU fan is running but there is no display in the screen,

then remove the RAM from the slot, clean it and place it back properly or try

another slot. Check your RAM also. Even bad RAM will result in display problem.

Good Luck
1
Answer 2 / 2
Razzadas Posts 2 Registration date Saturday July 28, 2012 Status Member Last seen July 28, 2012
Jul 28, 2012 at 06:31 PM
Hi Mate

Hey, all to easy, I did what you suggested about removing ram and cleaning, I also used another ram jack and all is good.

Great work and thankyou very much.

Razzadas
0

Similar discussions

Lenovo monitor won't turn on
Johnn -
Xyro -

2 responses
No display on monitor, light blinks
Harsh20_4 -
Anonymous -

9 responses
monitor light blinking,no display
md -
ac3mark -

5 responses
Power light blinking continously
Sommy -
HelpiOS -

1 response
monitor keeps going in power save mode
diane31diane -
boog -

9 responses