No signal on my monitor
Closed
Nickname..Felix Armah-Mensah
-
Mar 28, 2015 at 11:50 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Mar 29, 2015 at 12:07 AM
jack4rall Posts 6428 Registration date Sunday June 6, 2010 Status Moderator Last seen July 16, 2020 - Mar 29, 2015 at 12:07 AM
Hello, I have a problem with my systems units. when I switch it on nothing appears on the monitor. what do I do?
Related:
- No signal on my monitor
- No signal on monitor but cpu running - Guide
- D'sub no signal lg monitor - Monitor Forum
- Cannot be used available in d-sub signal only - CPU & Desktop Forum
- Computer turns on but no display on monitor - Guide
- D-Sub No Signal - Hardware Forum
1 response
jack4rall
Posts
6428
Registration date
Sunday June 6, 2010
Status
Moderator
Last seen
July 16, 2020
Mar 29, 2015 at 12:07 AM
Mar 29, 2015 at 12:07 AM
Hello,
Try this 1
If you notice that your CPU fan is running but there is no display in
the screen, then check your RAM also.
Remove the RAM from the slot, clean it and place it back properly or try
another slot.
If you are having two RAMs then remove it, place only one RAM and
check if you are able to get the display. If the problem still exists then
change the slot. If the problem still exists then try the above procedure
with the other RAM.
If you have no idea about RAM, then click on the below hyperlinks
RAM
Removing a RAM
Good Luck
Try this 1
If you notice that your CPU fan is running but there is no display in
the screen, then check your RAM also.
Remove the RAM from the slot, clean it and place it back properly or try
another slot.
If you are having two RAMs then remove it, place only one RAM and
check if you are able to get the display. If the problem still exists then
change the slot. If the problem still exists then try the above procedure
with the other RAM.
If you have no idea about RAM, then click on the below hyperlinks
RAM
Removing a RAM
Good Luck
