Pendrive ia not detected
Closed
ahmar
-
Jun 16, 2015 at 06:13 AM
Computertech Posts 3569 Registration date Friday February 6, 2015 Status Moderator Last seen July 18, 2016 - Jun 16, 2015 at 06:32 AM
Computertech Posts 3569 Registration date Friday February 6, 2015 Status Moderator Last seen July 18, 2016 - Jun 16, 2015 at 06:32 AM
1 response
Computertech
Posts
3569
Registration date
Friday February 6, 2015
Status
Moderator
Last seen
July 18, 2016
892
Jun 16, 2015 at 06:32 AM
Jun 16, 2015 at 06:32 AM
Hello ahmar,
Welcome to Kioskea Forum
Use this USB Show if you need the data and recover it soon.
And then you format it by using this command,
Go to Start/Search and type CMD Right click the CMD results and Run As Administrator. In the Elevated Command Prompt type the command
Diskpart
and press enter
At the
Diskpart> prompt type list disk and press enter. This should list all of the Mass Storage drives on the computer by Drive #, size and if they are Online.
If your Flash Drive is listed then type select disk and add the disks # (eg) Select Disk 4 it should say the disk is selected.
Now type Clean, this will wipe the drive, so be sure to select the correct one.
Now type list disk again, it should say the drive is online and the size. Now it should be listed in Disk Management as Unallocated Space, here you can Right click the drive and choose new Simple Volume, and format it.
If this doesn't work,
then download HP Disk storage format tool
if none of them works, then the drive needs to be replaced.
Please inform us when the issue is resolved. Thank you.
Welcome to Kioskea Forum
Use this USB Show if you need the data and recover it soon.
And then you format it by using this command,
Go to Start/Search and type CMD Right click the CMD results and Run As Administrator. In the Elevated Command Prompt type the command
Diskpart
and press enter
At the
Diskpart> prompt type list disk and press enter. This should list all of the Mass Storage drives on the computer by Drive #, size and if they are Online.
If your Flash Drive is listed then type select disk and add the disks # (eg) Select Disk 4 it should say the disk is selected.
Now type Clean, this will wipe the drive, so be sure to select the correct one.
Now type list disk again, it should say the drive is online and the size. Now it should be listed in Disk Management as Unallocated Space, here you can Right click the drive and choose new Simple Volume, and format it.
If this doesn't work,
then download HP Disk storage format tool
if none of them works, then the drive needs to be replaced.
Please inform us when the issue is resolved. Thank you.
