Previous Topic Next Topic

No signal

Closed
Tobiashovden Posts 3 Registration date Sunday February 22, 2015 Status Member Last seen February 23, 2015 - Feb 22, 2015 at 12:12 PM
Computertech Posts 3569 Registration date Friday February 6, 2015 Status Moderator Last seen July 18, 2016 - Feb 23, 2015 at 11:33 PM
Hello,

Last day my pc was upadting windows, and it turnd off, then when i trues to start it, the screen just say:no signal,
Ive tride everystep you have said to other but no one works , and everything in the pc works fine. Execept no signal
Help plz

1 response

Answer 1 / 1
Computertech Posts 3569 Registration date Friday February 6, 2015 Status Moderator Last seen July 18, 2016 892
Feb 23, 2015 at 12:17 AM
Hello,
Remove your power cord and hold the on button for like 30 second to a minute and then connect it back and turn it on....
If not try to adjust the VGA cable or try to tap F8 key....
check you hear beep sound while turn on the PC.. and fan running... post the result to know what problem it was and kioskea able to help you
0
Tobiashovden Posts 3 Registration date Sunday February 22, 2015 Status Member Last seen February 23, 2015
Feb 23, 2015 at 12:18 PM
It dident work to hold in power botten, but when i start the pc normaly when it worked it dosent say like press f10 or f8 and stuff, so that dident work either,
Its a windows 8 if that has anything to say, and i dont know how to run in safe mode
0
Tobiashovden Posts 3 Registration date Sunday February 22, 2015 Status Member Last seen February 23, 2015
Feb 23, 2015 at 01:55 PM
:/
0
Computertech Posts 3569 Registration date Friday February 6, 2015 Status Moderator Last seen July 18, 2016 892
Feb 23, 2015 at 11:33 PM
Hello,
To run in safe mode press F8 key continuosly after press power button and then select safe mode from that...
0

Similar discussions

LG monitor says D-sub no signal
Servant-Of-SSRR -
dinesh -

15 responses
LG monitor it keeps saying D- Sub, power saving mode
Joshua Conley -
Raif -

5 responses
Monitor: No signal 'Entering power saving mode shortly'
noor1365 -
KY_WD -

1 response
( HELP ) L-G Monitor says [ D-Sub Power Saving Mode ]
Ttheunluckyguy -
Langlang -

6 responses
Unsupported signal. Please check device output
S.Agnew -
Yaya68 -

14 responses