No internet through wireless router
Solved/Closed
Gumby
-
May 1, 2010 at 05:55 AM
xpcman Posts 19528 Registration date Wednesday October 8, 2008 Status Contributor Last seen June 15, 2019 - May 2, 2010 at 03:56 PM
xpcman Posts 19528 Registration date Wednesday October 8, 2008 Status Contributor Last seen June 15, 2019 - May 2, 2010 at 03:56 PM
Related:
- No internet through wireless router
- Wireless keyboard won't type - Guide
- Fenix internet l - Guide
- Internet explorer 11 for windows 10 64-bit - Download - Browsers
- Share internet from pc to iphone - Guide
- Internet cafe simulator 2 download pc - Download - Simulation
1 response
xpcman
Posts
19528
Registration date
Wednesday October 8, 2008
Status
Contributor
Last seen
June 15, 2019
1,824
May 2, 2010 at 03:56 PM
May 2, 2010 at 03:56 PM
that wireless router might have a firewall that is interfering with the connection. You already have a router in the building and this is the second router in the chain. These are some suggestions for using two routers:
Installing a Two Router Network
Installing a router to work as the second one on a home network requires a special configuration. Do the following on the second router to ensure it (and the devices attached) function properly:
1. Connect as local device or bridge - If connecting the second router via Ethernet cable, plug it into one of the LAN ports on the first router. If connecting the second router wirelessly, ensure the second router is set for client mode. Note that some home wireless routers do not support client mode; these must be connected by cable. Check your router documentation for details on its client mode configuration support.
2. Check / change IP address - Most home network routers use a default IP address setting. Often, these default IP addresses will not work in a two router environment. Check the second router's IP address value and reset it if necessary to work within the valid address range of the first router (and to not conflict with any other device on the network).
3. Disable DHCP - To avoid IP address conflicts between all of the devices on the home network, only one of your two routers should assign addresses via DHCP. All mainstream routers provide an option to disable DHCP as part of the router's configuration screens.
Good Luck
Installing a Two Router Network
Installing a router to work as the second one on a home network requires a special configuration. Do the following on the second router to ensure it (and the devices attached) function properly:
1. Connect as local device or bridge - If connecting the second router via Ethernet cable, plug it into one of the LAN ports on the first router. If connecting the second router wirelessly, ensure the second router is set for client mode. Note that some home wireless routers do not support client mode; these must be connected by cable. Check your router documentation for details on its client mode configuration support.
2. Check / change IP address - Most home network routers use a default IP address setting. Often, these default IP addresses will not work in a two router environment. Check the second router's IP address value and reset it if necessary to work within the valid address range of the first router (and to not conflict with any other device on the network).
3. Disable DHCP - To avoid IP address conflicts between all of the devices on the home network, only one of your two routers should assign addresses via DHCP. All mainstream routers provide an option to disable DHCP as part of the router's configuration screens.
Good Luck
