Limited or no connectivity
Closed
rtubig09
Blocked Profile - Aug 1, 2013 at 09:42 AM
- Posts
- 2
- Registration date
- Tuesday July 30, 2013
- Status
- Member
- Last seen
- July 31, 2013
Blocked Profile - Aug 1, 2013 at 09:42 AM
Related:
- Cisco anyconnect limited or no connectivity
- Limited or no connectivity cisco anyconnect - Best answers
- Pldt limited connection ✓ - Forum - Network
- Limited connectivity but excellent signal? ✓ - Forum - Network
- Dell Studio says limited connectivity ✓ - Forum - Windows
- Limited or no connectivity - Guide
- Limited or no Connectivity wireless network ✓ - Forum - Windows XP
3 replies
Good Morning,
If this pc is windows vista, you must select a network group. It is tough to t-shoot when no OS specifications.
If this pc is windows vista, you must select a network group. It is tough to t-shoot when no OS specifications.
rtubig09
Jul 31, 2013 at 05:20 AM
- Posts
- 2
- Registration date
- Tuesday July 30, 2013
- Status
- Member
- Last seen
- July 31, 2013
Jul 31, 2013 at 05:20 AM
its window xp sir
Good Morning,
Have you set the ethernet controller to dynamic IP?
On a working pc, go to start...run...cmd...ipconfig /all
note down the network address, something like 192.168.0.100
If you go and perform this task on of the working pc's, they will all have somewhat the same numbers, at least the first 3 of 4 (111.222.333.444)
Now go to the pc you added, and do the same. if the address is anything other than 192.168.0.X, then you are not pulling an ip address, or the controller has a static address assigned.
Have you verified this so far?
Have you set the ethernet controller to dynamic IP?
On a working pc, go to start...run...cmd...ipconfig /all
note down the network address, something like 192.168.0.100
If you go and perform this task on of the working pc's, they will all have somewhat the same numbers, at least the first 3 of 4 (111.222.333.444)
Now go to the pc you added, and do the same. if the address is anything other than 192.168.0.X, then you are not pulling an ip address, or the controller has a static address assigned.
Have you verified this so far?